7
Install the power supply enclosure above the treatment
chamber so that in the event of a leak, water cannot
drip down the lamp lead into the enclosure.
CAUTION: The supply cord is necessary for lamp
changing. The three pin supply plug must remain
accessible after installation. If installed to fixed wiring
without the plug a two pole switch must be fitted and
its ON and OFF positions shall be marked.
The Steriflo control box has a red LED alarm indicator
light mounted on its front panel, adjacent to the amber
“power on” LED. This light will be illuminated whenever
the Steriflo control box senses no lamp current. There
is also an audible alarm in the event of lamp failure. The
LED and/or alarm will only work when unit is connected
to the correct electrical supply.
