![Davey Steriflo UV130 Installation And Operating Instructions Manual Download Page 4](http://html1.mh-extra.com/html/davey/steriflo-uv130/steriflo-uv130_installation-and-operating-instructions-manual_3861344004.webp)
4
Congratulations on your purchase of a high quality, Australian made Steriflo
Ultra Violet water treatment system. All components have been designed and
manufactured to give trouble free, reliable operation.
Your new Steriflo system incorporates a lamp failure system design feature that
enables you to be warned of a lamp failure by :-
1. A lamp failure LED
2. An audible alarm
3. Remote alarm contacts
In addition when the alarm “beeps” on and off, the lamp is due to be changed so
that effective treatment is maintained.
Before installing your new Steriflo, please read all instructions
carefully as failures caused by incorrect installation or
operation are not covered by the guarantee. Your Ultra Violet
water treatment system is designed to handle clean water.
The system should not be used for any other purpose without
specific referral to CCL. The use of the system with flammable,
corrosive and other materials of a hazardous nature is
specifically excluded.
NOTE: The quartz sleeve
has been factory fitted,
and there is no need to
remove these endcaps
on first installation. Before
removing endcaps, please
read the Maintenance
section of these instructions
completely.
The appliance is not intended
for use by young children
or infirm persons without
supervision. Young children
should be supervised to
ensure they do not play with
the appliance.
Alarm
LED
(Red)
Alarm reset
On LED
(Amber)
Power Lead
1.5 metre
OUTLET
or INLET
OUTLET
or INLET
Lamp Lead
1 metre
Treatment
Chamber
Drain
Plug
Quartz Sleeve
(pre-installed
in chamber)
Lamp