6
Welcome to the luxury of a salt water swimming pool
We are dedicated to providing you with the most luxurious pool water you have ever experienced, as well as the most
reliable product and solid after-sales service you could hope for.
Reading this Guide will help ensure that your ECO-matic generator functions correctly and efficiently, help avoid the
expense of unnecessary service calls and make you aware of certain maintenance procedures which, if left undone, may
void warranties offered by the manufacturer. Please refer to the Trouble-Shooting section of this Guide before calling your
dealer.
Overview of the ECO-matic Salt Water Pool System
When salt dissolved in pool water and then subjected to simple electrolysis (by way of the in-line ECO-matic ‘Cell’), the
chloride portion of the salt (sodium chloride) is transformed into an effective sanitizer,* which has the ability to oxidize
(kill) bacteria, algae and other such organics which would otherwise flourish in the water. This process recycles, so it
does not consume the salt, which is simply used over and over again.
Sized to suit your particular pool or spa, y our ECO-matic system will provide the sanitizer necessary to maintain your
pool/spa water by using and recycling a natural product – salt. Your ECO-matic will do exactly the same thing as ‘pool
chlorine’ would do.
*(HOCl the same effective sanitizer as would result if ‘pool chlorine’ was added to the water – but without them the
unpleasant aspects of chlorine compounds and without the need to handle them.)
Your ECO-matic Equipment
When correctly installed, your ECO-matic will operate ONLY WHEN THE FILTER PUMP IS OPERATING and water is
flowing through the ‘Cell’. Your ECO-matic must
NOT
be able to operate while the filter pump is OFF. If your ECO-matic
continues to operate after the filter pump is switched OFF (as indicated by bubbling and cloudiness at the ‘Cell’),
turn it
off immediately
, contact your ECO-matic Dealer or the person who installed your ECO-matic immediately and ensure
that the fault is rectified.
INSTALLATION INSTRUCTIONS
Packing List:
PART
QTY
PART
QTY
POWER SUPPLY
1
‘O’RINGS, 50mm or 80mm ADAPTOR
1
PRESSURE SWITCH
1
EUROPEAN ADAPTORS OR
2
CONTROL BOX
1
40/50mm (1.5” / 2”) AUS ADAPTORS
2
GAS SENSOR
1
GAS SENSOR T-PIECE 50mm (2”)
1
MOUNTING BRACKETS
4
KEY
1
CELL CABLE (PAIR)
1
TAP FOR PRESSURE SWITCH
1
EXTERNAL CONTROL
CABLE
1
INSTALLATION & OPERATION MANUAL
1
SALTPRO ANNODE
1
FLOW METER
(Optional purchase but required for install)
