Assembly and Installation Guide
29
GB
1. Assembling instructions / Installing the feet
Required hardware:
4 x recessed head screws A
4 x spacer sleeves B
Required tool:
Included SW 6 Allen wrench
Pull the main device from the package and put it down in an upright position.
Install the
foot with casters
at the rear (under the U shaped perforated plate)
Install the
foot with adjusting screw
at the front
The caster and the adjusting screws must be pointing to the rear!
Assembling the device
1.3
Slide each of the spacer sleeves B around one of the 4
recessed head screws A respectively.
1.4
Lift the main device (1) from the rear to install the rear
foot. You could also put the device on a table, a trestle
or any other raised surface. The frames cross bar should
protrude from the supporting surface to simplify the
manipulation. (We recommend letting a second person
help lift and hold the device.)
1.5
Put the foot with casters in the rear crossbar and align
the holes to the threads in the crossbar.
1.6
Insert the first recessed head screw with spacer sleeve
into one of the holes and screw it in lightly.
Do not tighten the screw yet, and do not use force to screw
it in!
1.7
Repeat this operation with the second recessed head
screw with spacer sleeve (as described under step 1.6).
1.8
Tighten the recessed head screws.
1.9
Lower the device with the attached rear foot, and lift it
in the opposite direction (to the rear), or if your are working
on a table, let the front crossbar protrude from the table
surface.
1.10
Proceed with mounting the front foot in the same
sequence described in steps 1.6 / 1.7 and 1.8.
1.11
If the ergo_lyps is installed on an uneven floor, use a
screwdriver to adjust the compensation setting in the
front feet to ensure a stable stand.
Foot with
caster roller
(rear)
rear
front
raise
frame
cross bar
Foot with
roller caster
or 1.4
put the device on a
table or a stable trestle
(rear)
Foot with
setting screw
(front)
Foot
front
with ground level
compensation screw
A
B
A
B
1. 4
1
Summary of Contents for ego_bike Premium 8
Page 1: ...User Manual ...
