USER
’
S MANUAL
13
Chapter 3 SAFETY
RISK OF FALLING (VEHICLE)
This hazard may arise in the case of incorrect positioning of the vehicle on the platforms,
overweight of the vehicle, or in the case of vehicles of dimensions that are not compatible with the
capacity of the lift.
When the platform is being tested, the vehicle engine can not be turned on.
There is nothing should be placed on the lift-lowering area and the movable parts of the lift.
RISK OF SLIPPING (picture 12):
Caused by lubricant contamination that of the floor around the lift. The area beneath and
immediately surrounding the lift and also the platforms must be kept clean. Remove any oil spills
immediately.
RISK OF ELECTRIC SHOCK
Risk of electric shock that in area of insulated and shattered electric equipments.
Do not use jets of water, steam solvents or paint next to the lift, and take special care to keep such
substances clear of the electrical control panel.
RISKS RELATED TO IMAPPROPRIATE LIGHTING
The operator and the maintenance fitter must be able to assure that all the areas of the lift are
properly and uniformly illuminate compliance with the laws in force in the place of installation.
During up and down operations, the operator should continually observe the lift and can operate it
only in the position of operator. When lifting and lowering the vehicle, the cushion needs being put
in the bottom of chassis.
The handling of safety devices is strictly forbidden. Never exceed the maximum carrying capacity
of the lift, make sure the vehicles to be lifted have no load.
It is therefore essential to adhere scrupulously to all regulations regarding use, maintenance and
safety contained in this manual.
Summary of Contents for LJS6035
