Datecs LP-1000, User Manual

Page: 40 / 50

40 LP1000
j. Data for imaging. The format is similar to the generation of text and
bar-code and is described further in the text. When the bar-code
functions with a set number of symbols the command will be re
jected at an unacceptable symbol. The same is valid in the case of
invalid bar-code lengths demanding a certain number of symbols.
Example: B0,0,0,Es0,2,3,60,B,”123456789012” will create a bar-code image of the
EAN13 type with a starting coordinate (0,0), not rotated, with bars 2 dots
wide, 60 dots high with a duplicating text with content: “123456789012”.
Drawing a There are three commands designed for this operation. LO prints in black,
LE inverts the dots located below the line (in the XOR mode), while LW prints, uncon-
ditionally, in white.
Format: LOa, a Starting coordinate for X:0...2047
b,c, d or LEa, b Starting coordinate for Y:0...2047
b,c,d, or c Size for X: 1...2047
LWa,b,c,d d Size for YL:1...2047
Example: LO10,10,100,200 Draws a rectangle with coordinates (10,10), (110,10),
(110,210) and (10, 210) in black.
Drawing a diagonal line
Format: LS[m]a,b,c,d,e m Non-compulsory parameter. Value E: mode XOR,W:white
a Starting coordinate for X:0...2047
b Starting coordinate for Y:0...2047
c Line thickness: 1...80
d End coordinate for X: 0...2047
e End coordinate for Y: 0...2047
Example: LSE10,10,8,100,200 Draws a line from coordinate (10,10) to (100,200) 8
dots thick which inverts the image over which it runs.
Drawing a frame The command generates a rectangular frame with a set line thickness.
Format: Xa, b,c,d,e a The X coordinate of the right angle: 0...2047
b The Y coordinate of the right angle: 0...2047
c Frame thickness: 1...80. Thickness is at the expense of
the inner area.
d: X coordinate of the opposite angle:0...2047
e: Y coordinate of the opposite angle: 0...2047
Example: X10,10,3,360,250 Draws a rectangle with a size of 250 x 240 and frame
thickness of 3 dots.