Datecs LP-1000, User Manual

Page: 34 / 50

34 LP1000
Saving a new PCX file * GM
Direct printing of graphic info * GW
Selecting the Code table I
Drawing a rectangle or a line L
Clearing the operational memory * M
Clearing current forms and graphic buffer * N
Printing a label * P
Resuming an interrupted printing session * PC
Setting the page length Q
Setting the starting point R
Setting date/hour* * TS
Setting date format TD
Setting hour format TT
Printing diagnostic information * U
Retrieving diagnostic information * U@
Returning a list of loaded fonts * UE
Returning a list of loaded forms * UF
Returning a list of loaded graphics * UG
Info on occupied memory * UM
Defining a text variable V
Drawing frames X
Setting doirection of print Z
Description command
Note! The commands marked with “*” cannot be included into a form (command file)
6. Detailed description of the commands
A. Setting the printer’s functional mode.
Setting the printing Offers the option to adjust the printing density depending on
density the sensitivity of the paper and the character of the printed
information.
Format: Dn n may be within the interval 0 to 15 where 15 relates to the
maximum density possible. Setting higher density rates leads
to slower printing.
Example: D6 Sets the printing density to 6.
Setting the printing Format: Sn where n may be between 2 and 6 , the value being
speed approximately 24.5 mm per second. At higher density rates
the printer may nor be able to print at this speed.
Example: S4 where speed is set at 100 mm/sec