manualshive.com logo in svg

Datecs LP-1000, User Manual

Share
Download
Datecs LP-1000 User Manual Download Page 17

LP 1000

                       17

Button 

<Store current label>

 stores the label from the screen under the selected

name.

Button 

<Store form to printer>

 opens a dialog for the selection of a file from

the  disc. The form selected by the user will be  loaded in the printer and if this form
contains graphics and loadable fonts  you must load them yourself by using the buttons,
shown below.

Button 

<Store graphics to printer>

. Opens a dialog for the selection of a file

from the disc. Acceptable are only PCX format, monochrome files of no more than 32
kB.

Button 

<Store font to printer>

 Opens a dialog for the selection of a file from

the disc. The fonts must be in a specified format. The command for loading a font must
be compatible to the EPL2 language. For the generation of a font you may use the
“Eltron Font Downloader” and the needed TrueType font with the given  number.

3.2. Label setup

This part of the program gives you the option to set the different parameters of

the label and the print. The fields on the screen have the following meaning:

Label width: 

The width of the label in dots. If you know the size in millimeters,

multiply this times 8 and note down the result. Possible values are between 80 and 608.

Length: 

The length of the label in dots. If you know the size in millimeters, multiply this

times 8 and note down the result. Possible values are between 200 and 1640.

Orientation: 

Sets the printing orientation of the label. Select between “Top” -

normal orientation and “Bottom” - rotated to 180

o.

Darkness: 

Sets printing density, where the possible values are between 0 and 15,

15 being the darkest possible option. Greater printing density setups may cause a slow
down in the printing speed, especially when surrounding temperatures are lower.

Speed:

  Sets the printing speed. Set in inches per second possible values are

between 2 (about 50 mm/sec) to around 6  (about 150 mm/sec).  It must be born in
mind that the quality of the printed image may deteriorate at speeds above 125 mm/sec
depending on the thickness of the labels  and the quality of the paper. Additional adjust-
ments to the printing density in such cases may have to be done.

Language:

 Sets the language of the printed label. Possible selections are be-

tween “English”, “Bulgarian” and “Russian”.

Label gap:

  Sets the distance between the pages when labels on paper rolls are

used or the distance between the separate labels/ the thickness of the black line  when
working with labels. Maximum 80 points.

Offset:

 Additional shifting of the start of the printout. Its value depends on the

type of the labels used.  Possible values are between  - 80 and 80 dots.

Paper: 

Paper type (of no importance at present)

Left margin: 

 Horizontal shift of the image in dots. Possible values are between

- 607 and 607.

Summary of Contents for LP-1000



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands