38
LP1000
Format: Aa, b, c, d,
a.
Starting coordinate on X for the upper left angle of the
e, f, g, h
text: 0...2047
b.
Starting coordinate on Y for the upper left angle of the
text: 0...2047
c.
Text orientation: 0=0, 1=90
o
, 2=180
o
, 3=270
o
where
rotation is clockwise.
d.
Font selection, where the following values are possible:
1:
8 x 12 dots
2:
10 x 16 dots
3:
12 x 20 dots
4:
14 x 24 dots
5:
32 x 48 dots
d can be a Latin letter in which case it is a name of a
loadable font. The size of the symbols are there contained.
Around each of the in-built fonts there is a white frame 1
dot wide so that the printable
size is actually 2 points
bigger than the size stated above.
e.
Selection of a multiplier for X of the font. Possible values
are 1...8.
f.
Selection of a multiplier for Y of the font. Possible values
are 1...9.
g.
Printing mode
: N
- normal,
R -
inverted,
B
- bold,
W -
inverted bold.
The loadable font can be printed only in a normal mode.
h.
Text data.
The format for generating a text and a bar-
code is the same and is described further on.
Example: A10, 10,
will create an image of the text “Something” from the coo
1, 3, 2, 2, N,
rdinate (10,10) rotated to 90
o
with font
12 x 20 multiplied
“Something”
times 2 in a horizontal and vertical direction. The text is not
inverted.
Generating
The command is used for inserting a bar-code in the image
bar-codes
Format:
Ba,b,c,d,e,
a.
Starting coordinate on X for the upper left angle of the
e, f, g, h,[i],j
text: 0...2047
b.
Starting coordinate on Y for the upper left angle of the
text: 0...2047
c.
Text orientation: 0=0, 1=90
o
, 2=180
o
, 3=270
o
where
rotation is clockwise.
d.
Selection of the type of bar-code for printing - text from
1 to 3 symbols. The following values are possible:
Summary of Contents for LP-1000
Page 49: ...LP 1000 49 Notes ...
