Datecs LP-1000, User Manual

Page: 36 / 50

36 LP1000
Format: ZT or Normal image
ZB Image rotated to 180
o
Set date and hour The command is used to set the real-time clock of the
printer.
Format: TSm,d,y,h,m,s m month (1...12)
d day (1...31, validity of the date being checked)
y year - the last two digits (0...99).
h hour (0...23)
m minutes (0...59)
s seconds (0...59)
Example: TS10,2,01, Sets clock to 2 October 2001, 14:10:10
14,10,10
Setting the form of The command sets the mode in which the string will
the date generate the current date.
Format: AxBvC With capital letter the fields for the date have been marked.
A,B and C may have the following values, which may be
used not more than once:
-Y2 or Y4 The current year, marked with 2 or 4 digits
-ME or MN The current month shown in three letters or two digits.
-DD The current day of the month.
The small letters mark the spaces between the fields. They
are entered together with the symbol which we wish to use.
Example: TDdd-me-y4 This would generate a date of the type 02- Sep-2001
Setting the format of The command sets the mode in which the current hour
the hour will be generated by the string
Format: AxByC Schematically the fields of the hour have been marked-
with capital letters. A, B and C can have the following values
which may be employed not more than once.
-H: The current hour.
-M: The current minute.
-S: The current second.
The small letters are used to designate the spaces between
the fields. They are entered imediately after the symbol
which we wish to use.
Example: TTh:m:s This will generate a string of the type 15:30:20.