1 DATECS
BLUEPAD-5000 USER GUIDE
1 DATECS
Page 22 of 25
Display indicators
Battery indication for discharged battery
Battery indication for fully charged battery
Outside power from USB cable
–
“Plug”
Battery is charging from UBS cable or Power station
–
“Flash”
"Bluetooth"
–
active Bluetooth connection
"USB" - connection with USB
Troubleshooting Guidelines
This chapter lists typical examples of malfunction you may encounter while operating your
BLUEPAD-5000 unit and steps you can take to resolve them.
The troubleshooting guidelines provided in the following section are included to assist
successful installation and configuration of BLUEPAD-5000 units. If you are having problems
operating your BLUEPAD-5000 unit, please read through these troubleshooting examples. If
the problem persists even after performing the outlined guidelines or if the problem is not
described, contact your local Datecs representative for assistance.
The BLUEPAD-5000 unit contains no user-serviceable parts. Do not, under any circumstance, attempt
to disassemble the unit. Perform only those adjustments or repairs specified in this guide. For all other
services, contact your local Datecs service provider. Service conducted by parties other than
authorized Datecs representatives may void any warranty.
Blank Display
When the BLUEPAD-5000 unit display does not show correct or clearly readable information:
•
Check battery power.
•
In some cases this would be a ESD (Electro Static Discharge). Please turn on the device
again.
•
If the problem persists, contact your local Datecs service provider.
