Datcon DT9100 I4, Operating Instructions Manual

Page: 42 / 64

DT9100 I4
Sequence of operations 11. If you want to test synchronisation input, press ▲ button
to change

mnemonic to

mnemonic.
(It’s meaning: synchronisation input test)
12. Press
ENTER button.
13. You can read on the display:
•

when the synchronisation input is in inactive state
(I = 8 mA)
or you can read on the display:
•

when the synchronisation input is in active state (I > 12 mA).
14. Press MENU button to exit from this menu item:
you can read on the display

mnemonic. The
mnemonic is blinking.
15. Press ▲ button to change

mnemonic to

mnemonic. (It’s meaning: Temperature measurement)
16. Press
ENTER button.
17. You can read on the display the temperature inside the
instrument in °C.
18. Press
MENU button to exit from this menu item: you can
read on the display:

mnemonic. The mnemonic is
blinking.
Exit from the menu item 1. Press the MENU button, to exit from the Tests menu
item, and you see this:

.
(2. If you want to return to the tests, go on from point 3 of
the Sequence of operations .)
(3. If you don’t want to exit the menu because you want to
perform further settings, you can select the desired menu
items by pressing the ▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
42
20180905-V120180905-V1