DT4240 xx xx xx xx
14
20230503-V0
5.2. Connecting the mains
The following figure shows the wiring plan, connecting the
DT4240 xx xx xx PS type instrument to the mains:
Wiring plan, connecting
the instrument to the
mains
(see also “Application
example”)
In case of DC supply the
polarity is indifferent
The following figure shows the wiring plan, connecting the
DT4240 xx xx xx type instrument to the power supply:
Wiring plan, connecting
the instrument to the
mains
(see also “Application
example”)
In case of DC supply the
polarity is indifferent
1. Loosen terminal screws.
2. Insert the wire ends into the open terminals according to
the wiring plan.
3. Screw the terminal in.
4. Check the hold of the wires in terminals by pulling on
them firmly.
Summary of Contents for DT4240 Series
