DT4240 xx xx xx xx
20230503-V0
17
5.5. Connecting the analogue output (option).
The following figure shows the wiring plan, connecting
analogue output in case of active (DT4240 xx xx IA xx) or in
case of passive (DT4240 xx xx IP xx) output:
Wiring plan, connecting
the analogue output
(see also “Application
example”)
Be careful the polarity of
the cables.
1. Loosen terminal screws.
2. Insert the wire ends into the open terminals according to
the wiring plan.
3. Screw the terminal in.
4. Check the hold of the wires in terminals by pulling on
them firmly.
Summary of Contents for DT4240 Series
