Datcon DT4120 Series, Operating Instructions Manual

Page: 75 / 92

DT4120 xx xx (PS)
20170324-V0
75
Assign 100% to any
physical value (scaling)
Sequence of operation
32. Keep stepping by pressing the ▲ button as long as you
see this menu item:

( P otentiometer S cale 100% =
potentiometer scaling 0%).
33. Enter the menu item by pressing the
ENTER button.
34. You will see:

. on the display. The number on
the left is blinking, signaling that it can be modify.
35. Pressing the
► button you can step to the nex digit.
36. Pressing the ▲ button you can increase the value of the
blinking digit:

,

,

,

,

,

,

,

,

,

,

, etc.
37. When the digit on the left side is selected pressing the
▲ button the sequence is as follows:

,

,

,

,

,

,

,

,

,

,

,

, etc. so you
can set any number between -9999-99999.
38. After setting exit from this menu item by pressing
MENU
button. You can see

on the display.
Exit from the menu item After finishing settings press the MENU button to exit from
this menu item. You will see

.
(2. If you want to change the setting you have performed
just now, or if you just want to check what you have typed
in, continue the operation from
Point 3 of the Sequence of
operations. )
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the
▲ button to
select the desired menu items.)
Exit from the menu
Press the MENU button. First the mnemonic

( Save ),
then the mnemonic

( Exit ) are shown on the display.
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.