Datcon DT2500 Series, Operating Manual

Page: 16 / 29

DT2500
16
20171220-V1
9. Dismounting
9.1. Dismounting procedure
The following figure shows the dismounting procedures:
Dismounting from the
rail
The dismounting procedure needs a screwdriver for slotted screws.
1. Before dismounting disconnect all wires.
2. Put the screwdriver end into the fixing assembly’s hole (figure step
1.).
3. Lift the screwdriver handle until it possible to open the fixing
assembly (figure step 2.).
4. Keeping the screwdriver in this position lift the instrument bottom
from the bottom edge of the rail (figure step 3.).
Lift the whole instrument (you may put out the screwdriver) (figure
step 4), the instrument will be free.
9.2. Disposal
According with the concerning EU directive, the manufacturer
undertakes the disposal of the instrument that are manufactured by it
and intended to be destroyed. Please deliver it in contamination-free
condition to the site of the Manufacturer or to a specialized recycling
company.
stop