Datcon DT2500 Series, Operating Manual

Page: 10 / 29

DT2500
10
20171220-V1
4.3. Mounting procedure
The following figure shows the mounting procedures (fixing on the
rail):
Mounting on the rail
The mounting doesn’t need any tool.
1. Tilt the instrument according to the figure; put the instrument’s
mounting hole onto the upper edge of the rail (figure step 1.).
2. Push the instrument’s bottom onto the bottom edge of the rail
(figure step 2.); you will hear the fixing assembly closing.
3. Check the hold of the fixing by moving the instrument firmly.
Leave at least 15 to 15 mm air space on both sides of the power
supply.