6
Packing List
Items
Description
Q’ty
1
VS-100 unit
1
2
Power adaptor 12V / 0.2A
1
3
Instruction Manual
1
Introduction
Video image quality is often determined by a combination of multiple
factors such as camera alignment and calibration. The location of the
production and the brands of connected video devices especially under
Electronic Field Production (EFP) conditions can cause variable image
quality in terms of brightness, colour saturation, and white balance
between different video sources. Traditionally, experienced camera
operators would align equipment before a production in order to avoid too
much time and resources being spent on adjusting images in post
production.
In order to make this alignment process easier and more efficient,
Datavideo presents the VS-100, a cost-effective Sampling Video Scope.
This unit provides quick, accurate and standardized ways to calibrate and
align signals from cameras and other video equipment. Its small size and
DC voltage input means that it can be a go-anywhere engineering tool
when paired with a HD / SD monitor like the Datavideo TLM-700HD or a
rack based studio tool when paired with a TLM-702HD monitor.
Alternatively it can be used with any HDMI or SDI monitor.
The VS-100 can be used to test and compare the accuracy of incoming
video signals from cameras and/or connected equipment. The VS-100
can accept either SDI or HD-SDI input for signal analysis. The VS-100
can be set up to provide a clean video loop through on SDI/HD-SDI whilst
still allowing video scope views on its HDMI output. Alternatively the
scope view can also be displayed as a 1280 x 720 HD-SDI output.
