19
Camera output after adjustments (VECTORSCOPE)
1.
Under the same on set lighting conditions aim the camera at a
colour reference chart (
such as DSC labs’ Chroma Du Monde).
2.
Select VECTORSCOPE mode on the VS-100 using the NEXT
MODE option.
3.
Now, the VECTORSCOPE displays the analyzed colour
components. If the white balance of one camera had been
altered, the VECTORSCOPE matrix can be used as a check
point to ensure all cameras have been correctly aligned.
4.
Feeding camera output of 75% colour bars into a Video
Switcher confirms if the colour image is correct after the
switcher too.
