background image

 

Warnings and Precautions 

1. 

Read all of these warnings and save them for later reference. 

2. 

Follow all warnings and instructions marked on this unit. 

3. 

Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning. 

4. 

Do not use this unit in or near water. 

5. 

Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious 
damage. 

6. 

Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To 
ensure safe and reliable operation of this unit, and to protect it from overheating, do not 
block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, 
as the ventilation openings on the bottom of the cabinet will be blocked. This unit should 
never be placed near or over a heat register or radiator. This unit should not be placed in a 
built-in installation unless proper ventilation is provided. 

7. 

This product should only be operated from the type of power source indicated on the 
marking label of the AC adapter. If you are not sure of the type of power available, consult 
your Datavideo dealer or your local power company. 

8. 

Do not allow anything to rest on the power cord. Do not locate this unit where the power 
cord will be walked on, rolled over, or otherwise stressed. 

9. 

If an extension cord must be used with this unit, make sure that the total of the ampere 
ratings on the products plugged into the extension cord do not exceed the extension cord’s 
rating. 

10. 

Make sure that the total amperes of all the units that are plugged into a single wall outlet do 
not exceed 15 amperes. 

11. 

Never push objects of any kind into this unit through the cabinet ventilation slots, as they 
may touch dangerous voltage points or short out parts that could result in risk of fire or 
electric shock. Never spill liquid of any kind onto or into this unit. 

12.      Except as specifically explained elsewhere in this manual, do not attempt to service this 

product yourself. Opening or removing co

vers that are marked “Do Not Remove” may 

expose you to dangerous voltage points or other risks, and will void your warranty. Refer all 
service issues to qualified service personnel. 

13.      Unplug this product from the wall outlet and refer to qualified service    personnel under the 

following conditions: 
a. 

When the power cord is damaged or frayed; 

b. 

When liquid has spilled into the unit; 

c. 

When the product has been exposed to rain or water; 

d. 

When the product does not operate normally under normal operating conditions. 
Adjust only those controls that are covered by the operating instructions in this 
manual; improper adjustment of other controls may result in damage to the unit and 
may often require extensive work by a qualified technician to restore the unit to 
normal operation; 

e. 

When the product has been dropped or the cabinet has been damaged; 

f. 

When the product exhibits a distinct change in performance, indicating a need for 
service. 

 

 

Summary of Contents for VS-100

























Reviews: