Datavideo TVS-3000, Instruction Manual

Page: 9 / 64

9
Chapter 3. Layout of the Main Interface
The main interface of the Datavideo TVS-3000 software is shown as following diagram. The
main interface provides users many functions including “Control and Status Bar”, “Function
Bar”, “Preview Windows for Switching Channel”, “PREVIEW/PROGRAM Windows”, “Switching
Buttons”, “Transition Effect”, “Overlay Sources for PGM Channel/Overlay Sources for Specific
Channel”, “Virtual Camera Center”, “Location Changing Adjustment Panel”, “Lists of Different
Types of Materials” and “Audio Mixer” for users. Please see following paragraphs for detailed
introduction of the main interface of the TVS-3000.
3.1 Control and Status Bar
Control and Status bar provides users the basic setting option. Users can save or open the
engineering document from the “File” option. Moreover, users can set the basic PGM channel
of the software, modify the streaming parameters, set the Multiview output format, set the
PTZ control parameters and open the Image & Text Editor from the “Options” drop-down
menu. The options in the drop-down menu will be updated according to the software version
update. The “Control and Status Bar” is shown as following diagram.
3.2 Function Bar
The System Clock is located at the left side of the Function Bar and the Output Switch is
located at the right side of the System Clock. When the Output Switch is pulled to the right
side, the PGM channel will be activated and the PGM output will be started. The three bars
which are located at the right side of the Output Switch are used for monitoring the hard disk
3.1
3.2
3.3
3.4
3.5
3.6 3.7
3.8
3.9
3.10