Datavideo TVS-3000, Instruction Manual

Page: 16 / 64

16
4.2 Add Signals
4.2.1 Material Categories
For the TVS-3000 software, users need to put different local materials and input signals that
are needed for the program production into different material categories for management and
allocation. Before production, users can add those materials into the lists of corresponding
material categories. The material list is located on the bottom side of the whole TVS-3000 user
interface. Users can show the corresponding material list by clicking the tag of each material
list for further operation.
CAMERA
:
Users can add different camera signals, Input signals for NDI agreement and
capturing signal for the second display panel into the material list of the “CAMERA” option.
Please press the “CAMERA” tag and then click the “Plus” button which is located on the
bottom left side of the material list window to open the drop-up menu. The drop-up menu will
list all of the camera signals, input signals for NDI agreement and capturing signal for the
second display panel automatically.
Each time when the plus button is pressed by users, the latest signal sources that can be used
by users will be updated immediately. So, for the NDI signal and the signals for the newly-
installed capturing card, users can press the “Plus” button to update the latest signals that can
be used. The signals which are already added into the “CAMERA” category will not be shown
again.
Users can press the needed item in the signal list and then the corresponding signals will be
added into the list of the “CAMERA” category. The video format and the resolution of the
input signal will be recognized automatically by the system and the input signal will be shown
in thumbnail in a small window. The sequence number and the model name of the device for
the input source will be shown below the window of the corresponding signal source.
Moreover, the the time code of the input source device, resolution and the video format will
be shown below the model name of the device.
Please press the Plus key to
open the list of the camera
option