Datavideo TVS-3000, Instruction Manual

Page: 14 / 64

14
3.10 List of Different Materials and Audio Mixer
The Datavideo TVS-3000 can divide many local materials and signal sources into several
categories. The tags for the lists of different materials are located on the top of the material
lists for different material categories. Click the tag allows users to enter the list for each
category. There are five material lists from No.1 to No.5 for the DDR/IMAGE/SUBTITLE
categories. For other categories, they have one material list only. The way to add content into
the material list is to click the Plus button on the bottom left side. The material list can be
browsed by using the mouse wheel. For some material lists for saving the playable materials,
there are playback progress bar and mark-in/mark-out progress bar which are located on the
bottom left side of the material list window for users to jump to specific point for playing by a
slider or to set the mark-in and mark-out points. There are some buttons including “Loop”,
“Single” and “AutoPlay” which are located on the bottom right side for users to set the
regulation for the playback. For the material lists which can be played in a specific order, there
are five sub-playlists which are located on the left side of the material lists for users to edit five
sub-playlists within one material category. The example for the material list for the “SUBTITLE”
category is shown as following diagram.
Users can open the audio mixer interface by pressing the AUDIO MIXER tag, the audio
situation for each corresponding switching channel will be shown on its corresponded audio
mixer channel. Users can adjust the volume for each channel by the slider or can press the
“MUTE”, “SOLO” and “FOLLOW” buttons to turn on/turn off the playback regulation of the
audio source for each corresponding channel. The slider which is located below the
headphone icon on the left side of the first audio channel is used to control the volume of the
monitoring output. The “AUX INPUT VOLUME” knob which is locatec on the right side is used
to control the audio volume of the independent audio input source. The “OUTPUT VOLUME”
knob is used to control the audio volume of the final program output. Users can press the
“AUX” tag which is next to the “OUT” tag to open the audio mixer of independent auio input
source. All of the activated independent audio input facilities which are connected to the TVS-
3000 will be shown in this section. Users can adjust the volume of the audio input source and
the regulation for the audio output in this section. The audio mixer is shown as following
diagram.