45
FPGA
1.
Unzip / extract the firmware file.
2.
Delete the contents of the USB 2.0 pen drive so it is empty.
3.
Copy the fpga.bit to the USB 2.0 pen drive.
4.
Plug the USB 2.0 pen drive into the USB 2.0 port labelled SERVICE on the back of the
monitor.
5.
“Load FPGA…” appears on the screen as soon as the TLM-170K detects the fpga.bit file.
6.
fpga.bit is automatically loaded on the TLM-170K.
7.
The TLM-170K reboots itself after fpga.bit is successfully loaded.
8.
The firmware update is complete if the TLM-170K Monitor reboots successfully.
Summary of Contents for TLM-170K
