11
CHECK / Lock
GAIN value, SHUTTER speed, FILTER position, IRIS, Master Pedestal,
R/B Gain and RGB pedestal values are shown on the display below in
this order each time the CHECK button is pressed.
If the CHECK button is pressed and held down for over two seconds the
MCU-100S unit will switch in to LOCK mode.
PS: CHECK function to be modifications.
LED display
The IRIS value, Shutter degree, speed, Gain and Filter positions can be
displayed here by using the CHECK button.
*The M. PED, PAINTING GAIN R/B and BLACK R/G/B values can also
be displayed sequentially here. See CHECK button also.
When in LOCK mode this display will show Lock.
PS: Those LED display functions will be updated and had modifications.
EXT LED
This LED will be ON when a lens extender is detected on the chosen
camera.
PS: EXT LED function will be updated and had modifications.
IRIS button
To enable or disable Auto Iris.
The button is back lit orange when Auto Iris is enabled.
IRIS control
Used to adjust the Iris value. See IRIS and CHECK buttons also.
