9
CANCEL
In Camera Menu mode, press this button to cancel the set value.
Menu
When this function is enabled, the button is back lit orange and the OSD
menu is shown on the LCD panel/view finder of the camera. This OSD
menu may also be shown on the AD-1S’s composite output (if
supported).
Some camera models also allow this OSD menu to be displayed on the
SDI or HDMI output of the chosen camera. Refer to your cameras
manual for more details on its OSD Menu outputs and change settings
where necessary.
SHUTTER
In Remote Control mode, Moving this switch to enable the Shutter
function. The current shutter speed is displayed on the adjustment value
indicator and the shutter speed can be adjusted with the adjustment
knob (rotary encoder). In Camera Menu mode, moving the switch to
enable the character display function on the camera.
ON /OFF
To turn on/ off the shutter operation.
ECS (Extended Clear Scan)
In Remote Control mode, moving the switch to enable the ECS function.
SLS (Slow Shutter)
In Remote Control mode, moving the switch to enable the SLS function.
PS: SLS function will be updated and had modifications.
SEL - Select dial
The select dial is used for two functions, to navigate the menus or to
control the shutter speed.
When the MENU button is active and back lit orange. The select dial is
turned to navigate through the camera’s menu options. Pressing in the
same dial, like a button, confirms the current selection or value shown.
When the MENU button is NOT active and back lit green. The select dial
can be turned to adjust the SHUTTER speed of the camera.
AWB / ABB switch with LED
This switch is used to trigger Auto White Balance (AWB) or Auto Black
Balance (ABB) adjustment.
AWB
: White balance is adjusted automatically. When the W.BAL switch
is set to A or B at this time, the value to which the balance was adjusted
will be stored in memory A or memory B.
ABB
: Black balance is adjusted automatically. This value will be stored in
a dedicated ABB memory.
LED ON
: Auto white balance / auto black balance in progress.
LED OFF:
Auto white balance / auto black balance completed.
LED stops blinking and goes off
: Auto white balance / auto black balance
error.
PS: AWB / ABB, those two functions will be updated and had
modifications.
