10
W.BAL switch
This switch is used to recall the preset or stored values of white balance
in the camera.
A or B: This will apply the value stored in the white balance A or B
memory in the camera recorder. When the AWB / ABB switch is set to
the AWB position, the white balance is automatically adjusted and the
value adjusted is stored in the selected memory A or B.
PRST
This will apply the preset value of the white balance stored in the camera
recorder.
CAM A.KNEE switch
To select the video signals to be output from the camera.
BARS
Camera generated colour bar signals are output.
CAM. AUTO KNEE OFF
The images shot by camera are output. The AUTO KNEE circuit does
not work. MANUAL KNEE is set as the camera recorder's initial setting.
CAM. AUTO KNEE ON
The images shot by the camera are output. The AUTO KNEE circuit
works.
NOTE:
AUTO KNEE circuit will not be effective if DRS (Dynamic Range
Stretch) function is enabled. It is also possible allocate the MANUAL
KNEE and DRS functions via the menu settings on the camera.
GAIN switch
Allows selection of the video amplifier’s gain depending on the lighting
conditions that are present in the camera’s location.
Moving the switch upwards increases the gain in dB steps.
Moving the switch downwards decreases the gain in dB steps.
Master Pedestal Control
These buttons are used to adjust the level of the Master Pedestal.
Enable & Painting Adjustment buttons
Press the ENABLE button in the
Painting area
of the MCU-100S before
choosing to adjust either the level of the Red and Blue Gain or the RGB
Pedestal values.
Mini USB 2.0 port
This port is used for firmware updates or to save/transfer MCU-100S
settings to computer.
See
page 14
for firmware update details.
