17
Transition Effect Indication
The selected transition will be indicated
in the status area of the HDMI multi-
view output. When the
INV
button is
pressed, the six wipe icons change to
their opposite direction icon.
Triggering the Transition
SPEED
There are three speed buttons which can be defined by the
user. By pressing a speed button the user is choosing the
rate of transition or time taken when using the
AUTO TAKE
button.
AUTO TAKE
This performs an automated switch from the current
program source to the selected preset source. The selected
transition wipe or dissolve will also be used. The timing of
the transition is set by the chosen Speed button.
CUT
This performs a simple immediate switch from the current
main source to the selected sub source. The selected
transition wipe or dissolve is not used.
FTB
Fade To Black, this button fades the current video program
source to black. When pressed again it acts in reverse from
complete black to the currently selected program video
source.
T-Bar
This performs a manually controlled transition from the
current program source to the selected preset source. The
selected transition wipe or dissolve will be used. When the
T-Bar
has travelled as far as it can go, the transition
between sources is complete. The
T-Bar
has indicators next
to it, which light when the transition is complete.
The
T-Bar
can be operated in one of two modes which is
chosen by a menu option, see the section on
