25
SD: Composite Signal
Tick selection for ON or OFF
H-Timing
0-255
Factory Settings
Factory Settings
Tick selection for ON or OFF
Resets to factory default
Clock Settings
Horizontal Position (Left to
Right)
000-110
Vertical Position (Lower to
Upper)
000-124
SET Hours
0-23
SET Minutes
0-59
Clear Seconds
Tick selection for clearing second
Multi Screen Mode
This option sets HDMI outputs 1 and 2.
A: M1=PVW+PGM+3 IN; M2=9 IN
B: M1=PVW+PGM+12 IN; M2=PGM
C: M1=PVW+PGM+8 IN; M2=PGM
D: M1=PVW+PGM+12 IN; M2=M1
E: M1=PVW+PGM+8 IN; M2=M1
GPI Settings
Input Select
00-12
Chosen input number
Time Delay
In frames between 1 to 75
Mode
Level Mode
Tick selection for ON or OFF
Pulse Mode
Tick selection for ON or OFF
Countdown Timer Settings
Input 1-12
Count Down Enable
Each input can be selected
for
Count Down
ON or OFF.
Down Counter Value
If
Count Down
is ON then the
Down Counter
value is set in
minutes and seconds
(MM:SS) - Max.= 1 Hour or
60:00, Default = 15 Seconds
or 00:15
Multi-Screen Audio Source
Preview
Tick selection of Program or Preview audio on the HDMI outputs
Program
Control Interface
Ethernet
Tick selection for ON or OFF
RS422
2.2.8 PC Control – SE Remote Control Software
It is possible to control the HS-2850 with a Windows 7 computer using an Ethernet
connection. The SE Remote software supplied with the switcher needs to be installed on the
computer first. The HS-2850 then needs to be placed into PC Control mode. To do this press
the
PC Control button
on the HS-2850 Control Panel. Once launched, the Remote software
displays an image of the HS-2850’s keyboard as shown below. Any active functions or
selections will be shown with a red button or key. These buttons or keys can be clicked with
a mouse or alternatively you could use a touch screen monitor.
