60
An external audio mixer is not required
. If you just want to work with SDI / HDMI
embedded audio, it is NOT necessary to physically connect the switcher’s XLR outputs with
the XLR inputs 1 and 2 to re-embed the audio again; simply adjust the corresponding
settings using the OSD menu.
5.3 Audio Menu Options – Monitoring the audio levels
The HS-2850 can confirm the incoming audio levels by showing audio peak meters on the
HDMI multi-view. See
Section 3.7 Multiview Layout Tab
It is also possible to hear the preview or program audio from the multi-view HDMI outputs
using the menu option below.
Multi-Screen Audio Indicators
Multi-Screen Audio
Indicators
Tick selection for ON or OFF
5.4 Audio Menu Options – Changing the audio input level
The HS-2850 can change the incoming audio level on the video inputs by adjusting the
following menu option.
On Preview Audio Level and Delay
Level
Range +60 to -60
AUDIO DELAY
Range 0 to 16
Nominal
Resets value to 00
The audio level can also be changed at the external audio mixer if one is used.
