Datavideo HS-2850 Page 78 Instruction Manual Download

Page: 78 / 84

Monitor Firmware Update

Requirements



The latest firmware update for the HS-2850 Monitor.
This firmware file can be obtained from your local Datavideo office or dealer.



USB 2.0 pen drive 128MB or larger with a USB A connector.

How to update the firmware

Unzip / extract the supplied zipped archive or rar folder.

Delete the contents of the USB 2.0 pen drive so it is empty.

Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive; make sure
the file name is renamed to MSTFLASH.bin.

Plug the USB 2.0 pen drive into the USB 2.0 port labelled MONITOR F/W UPGRADE
on the front of the monitor button panel.

Reboot

HS-2850

and the update will be automatically in progress.

The

HS-2850 Monitor

will reboot itself at the end of the process.

Summary of Contents for HS-2850




















































































Search results

Summary of Contents for HS-2850

Reviews:

Related manuals for HS-2850

Brands by name

Popular brands

Datavideo HS-2850, Instruction Manual

Search results

Summary of Contents for HS-2850

Reviews:

Related manuals for HS-2850

Brands by name

Popular brands