9
Rear Panel
The Input Select Switches can be set to CV (Composite Video), S (S-Video
(Y/C)), YUV (Component) or DVI-I Signal. Set each input switch according
to the video signal you are connecting.
CAM = Camera/Foreground image BG = Background image
CAM IN Video Inputs for connecting the 4 types foreground video images.
These are CV (Composite Video), S (S-Video (Y/C), YUV (Component) or
DVI-I Input.
Loop through outputs of Composite, Component and S-Video are provided
below the input connections. There is no loop through option for DVI-I.
Background Input (BG Input) for connecting the video feed from your
background source. This could be from a VTR or DVD player for example.
The Composite and S-Video Inputs are at the top, and the Loop Through
Outputs are below. The S-Video input can be monitored from the
Composite Video Loop Through if required.
The S-Video Loop Through is
only active if the S-Video input is used.
The Main Video Output shows the final result of the keyer. There are two
composite outputs and one S-Video (Y/C), all three are active at the same
time. It is advisable to connect a monitor to one of these outputs so that you
can see exactly what the DVK-200 is outputting.
Power Switch, switches the DVK-200 On/Off.
DC In. Connect the supplied adaptor to the DC In socket, there is a locking
collar on the power supply lead which screws onto the socket thread to
ensure a positive connection. It is also possible to power the DVK-200 from
a suitable 12V Battery Pack, but please ensure that the power is regulated.
Grounding Terminal. When connecting this unit to any other equipment,
make sure that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure to use wire
with a cross-sectional area (csa) of at least 1.0 mm2.
