10
Dip Switches / Mode Select
The DVK-200 can be set to various modes using the Dip Switches.
Dip Switch
1 : OFF = NTSC, ON = PAL output
2 : OFF = 0 IRE, ON = 7.5IRE input/output
3 : OFF = Fixed, ON = PAL/NTSC auto detection (Detected
from the input signal)
4 : OFF = Dark / Bright Enhancement, ON = Dark / Bright
Enhancement Off
5, 8 : RESERVED
6 : OFF = VIDEO, ON = Colour Bars shown on main output
7 : DVI Zoom ( ON = 90% ) / ( OFF = 95%)
9 : OFF = 1024x768, ON = 800x600
10: OFF = DVI, ON = VGA
The DVK-200 can be fully controlled via RS 232 please refer to the RS 232
protocols section at the rear of this manual for further details.
The DVK-200 can be switched via GPI trigger.
Using the GPI In socket you can switch from KEY-1 (Green) to KEY-2 (Blue)
remotely (via a 3.5mm cable with a latching switch)
The GPI Out Socket allows the DVK-200 to switch external devices.
The GPI Sockets are also used to connect the Datavideo TD-1 Light Ring
Controller. The TD-1 can switch the DVK-200 from KEY-1 (Green) to KEY-2
(Blue), or the TD-1 can be controlled from the DVK-200.
Please see Using the DVK-200 with the Datavideo TD-1.