HARDWARE INSTALLATION
39
Fingerprint Identification Reader
1.
Affix the Mylar sheet onto the top stand cover, as shown.
(a)
2. Attach the reader module, with sensor area downward, to the top stand cover, as shown.
(b)
3. Secure the module with four screws (T2.5*6), as shown.
(c)
4. Connect the module's USB Interface Cable to the 5-pin connector on the Board, as shown.
(d)
a
b
c
d
RFID Identification Reader
1.
Affix the Mylar sheet onto the top stand cover, as shown
.
(a)
2. Attach the reader module, with sensor area downward, to the top stand cover, as shown.
(b)
3. Secure the module with three screws (T2.5*6), as shown.
(c)
4. Connect the module's USB Interface Cable to the 5-pin connector on the Board, as shown.
(d)
a
b
c
d
Summary of Contents for ARC Series
