120 40520-100a
ViPR User Manual
37
4.8.2.2
Basic IP Configuration
Figure 25 - Setup (Basic) – Basic IP Configuration
Item
Description
Use fixed IP settings
Enables the top three IP dialog boxes and disables the lower three. You may need to ask
your network administrator for the appropriate IP settings.
See section 4.7 for further details.
Use DHCP Client
To activate, select the “DHCP Client” radio button, click on the Apply button, click on the
Save Config button and reboot the Host PC. On restart, the top three dialog boxes are
disabled and the lower three read-only IP dialog boxes are populated with the IP settings
automatically assigned (if your network supports the DHCP Server capability).
NOTE: Activating this option will reset the unit’s IP address. If your network supports the
DHCP Server capability, make sure the IP address assigned by the DHCP server will be
accessible to you. If your network does not support DHCP server capability, the unit will
be reset to a default (192.168.204.1) IP address within the first 2 minutes.
IP Address
In “Use fixed IP settings” window, set to valid unique IP address for each individual unit
Netmask
In “Use fixed IP settings” window, set to valid IP netmask for each individual unit (may be
same or different depending on customer’s IP network topology).
Default Gateway
In “Use fixed IP settings” window, set to valid Default Gateway.
May change for different groups or locations.
