120 40520-100a
ViPR User Manual
27
Dataradio recommends immediately running the Setup Wizard. Once completed, proceed to change the
ViPR radiomodem login password as detailed in section 4.8.4.1 below. Do not lose the new password!
Should the password be lost, you will need to contact Dataradio support as detailed in section 1.3 earlier.
For subsequent access to the ViPR unit, use the User Name and Password that you will have configured.
Note:
The User Name entry is currently not an access-limiting factor. It only serves to identify the per-
son gaining access. User Name may be required by future versions.
4.4 Interface
Important note:
Record all original ViPR factory settings for possible future use.
Note:
Screen captures used throughout this document may vary slightly from actual screens.
The ViPR user interface is used to configure and view your network settings. To navigate, use the eight
top-level menus on the left, five of which expand to offer submenus. One gives Unit Status information
and one allows access to the Setup Wizard.
The interface main screen lists available selections for the selected menu or presents instructions. The re-
maining buttons are used to save your configuration, reset the unit, or access help.
Figure 10 - Web User Interface – Welcome Screen
Figure 12 – Attention sub-window
4.4.1 Apply, Cancel, Save Config, and Reset Unit
Several submenus have “Apply” and “Cancel” buttons.
The navigation area has “Save Config” and “Reset Unit” buttons.
