120 40520-100a
ViPR User Manual
30
4. On page three (Figure 15) of the Setup Wizard,
read the on-screen instructions. Once the
Encryption Pass Phrase is entered, note the
Encryption Key. Click Apply Your Changes.
Wait for the Progress bar activity to stop
(right
side of the Status bar)
. Click on Proceed to Next
Step.
If no change is made to the Encryption
dialog box, click on Proceed to Next Step
.
Important: Be sure to record your encryption
pass phrase for future reference.
Figure 15 - Setup Wizard - Page Three
5. Figure 16 of the Setup Wizard, read the on-
screen instructions. Once the IP Address and
Network Mask are entered (optional at this
point), click Apply Your Changes. Wait for the
Progress bar activity to stop
(right side of the
Status bar)
. Click on Proceed to Next Step.
If no
changes are made to the IP dialog boxes, click
on Proceed to Next Step.
Figure 16 - Setup Wizard - Page Four
