iBoot-30A
Page 8
iBoot-30a_v101118e
When you are finished with iBoot, click on Logout. A confirmation page will be displayed.
If another user is logged into the iB-30, a In Use
page will be displayed.
iB-30 uses an inactivity timer for security. This
timeout is user selectable from 0 to 99 minutes.
Setting to zero disables the timeout feature.
When there is no activity for the set time in
minutes, the user is logged automatically logged
out and the username and password will need to
be entered again for access. This is to prevent
accidental lockout by leaving the user logged in.
As the iB-30 allows only one Web user logged in at any time, use caution when disabling the timeout
feature, as it is possible to lock out other users by forgetting to logout. Closing the browser
will not log the user out and will lock out web access. If you do become locked out, access
the iB-30 via Telnet and reboot the unit.
Web Setup
iB-30 setup section consists of several pages. Access any page via the buttons on the left of the
page. Each time a setting is changed click on the Save button for that page to save the changes
before moving to the next page.
Device Settings
Device Name: Set a 20 Character name to be
displayed on the top of the Home page. This
assists in identifying which iB-30 is being
accessed.
Cycle Time: 0 to 999 seconds power cycle time.
This is the length of time the power will be off
during a reboot, or on during a power burst.
Network Settings
IP Mode: Select Static to set the IP address
using the fields below, or DHCP to allow a DHCP
server to set the IP Address.
IP address: Enter a static IP address. This will
be automatically set if using DHCP
Subnet Mask: Enter the Subnet Mask. This will
be automatically set if using DHCP
Gateway: Enter the Gateway. This will be
automatically set if using DHCP
HTTP Port: This setting is used to allow access
to iB-30 on a port other than the Web standard
iBoot in Use Message
Device Setup Page
Network Setup Page
