iBoot-30A
Page 17
iBoot-30a_v101118e
Firmware Upgrades
The iB-30+ can be field upgraded. Find the latest version, or special purpose versions at
http://dataprobe.com/support/iboot/
Upgrading the firmware with a minor upgrade (i.e. 1.01.xx to 1.01.yy) will not alter the user
defined settings. Major upgrades may or may not reset the iB-30+ to factory defaults. Check
the release notes for the upgrade before making changes to you iB-30+.
1) Insure that the Upgrade Enable checkbox is checked in the Setup > Network web page of the
iB-30+
2) Run the Device Management Utility, available at the link above. If the iBoot you would like to
upgrade is not visible in the list box, either
Select Device > Discover from the menu to locate iB-30+ units on the local network, or
Select Device > Add from the menu to add the IP address of the iB-30+.
Once the device is displayed in the list, highlight it
3) Select Manage > Upgrade
Browse to the file of the firmware file to be used. iB-30+ firmware uses the extension .g2u If
you don’t see any files of that type, make sure the ‘Files of type’ box is set for iB-30 or All Files.
4) Select the file to be used and click Open. The upload will begin automatically, and a progress
bar will be displayed.
5) When the firmware upload is completed, the iB-30+ will automatically reset and be ready for
use.
Firmware Upload Screenshots
