Datamax H Class, Operator'S Manual

Page: 64 / 160

56
The menu selections are defined as follows:
DISPLAYED
ITEM ITEM DESCRIPTION
MENU MODE Selects which menu level is accessed when entering the menu system,
where:
User Menu Accesses the limited function menu that contains basic controls. (Default
Setting)
Advanced
Menu Accesses the full function menu that contains all controls, settings, and
diagnostics.
CONFIGURATI
ON FILE Controls the creation, storage, and recall of printer configuration files,
where:
RESTORE
CURRENT * Provides a list of available configuration files. Selecting a file causes a
printer to reset and then re-configure according to the activated file.
SAVE
SETTING AS Creates a file based on the printer's current configuration, as described
here.
DELETE FILE
* Provides a list of available configuration files for deletion. After confirmation,
a file selected for deletion will be removed from memory. (Note that a
currently activated file cannot be deleted.)
DISABLED * Disables the option.
FACTORY
SETTING
FILE * Provides a list of available configuration files, where NONE is the default
value. The configuration information held in the selected file will be used to
restore the printer's database following the execution of a Level One Reset,
or by selecting YES when prompted in the SET FACTORY DEFAULTS
menu item.
INTERNAL
MODULE Sets the number of 1KB blocks allocated (of the 100 - 5120 KBytes of
memory available) for the internal DRAM ‘D’ module, where:
1088 KBytes Is the Default Setting.
DEFAULT
MODULE
Designates the memory module that will be used for file storage when no
other module destination has been specified, where:
D Is the Default Setting (DRAM module).
G Flash module.
SCALEABLE
FONT CACHE Configures the number of 1KB blocks allocated (of the 100 - 5120 KBytes of
memory available) for the scaleable font engine, where:
0511 KBytes Is the Default Setting.
Note: The available memory may vary depending upon printer model and options.