73
5.1.2
Printhead Pressure Adjustment
Printhead Pressure Adjustment should only be performed after attempting to improve print
quality through the use of other print quality controls.
A. With media loaded, download your label format (or use a Test Label format) then
begin printing a small batch of labels.
B. While observing the printed output, turn each Pressure Adjustment Screw (use a
small coin or screwdriver) by the same amount until the image is complete, with
even contrast:
•
Counterclockwise (+) to increase applied pressure, or;
•
Clockwise (-) to decrease applied pressure.
Ensure that each arrow points in the same direction.
