62
H-Class
Communications (continued)
Menu Item
Details
WLAN
Controls the communications settings for the optional
DMXrfNETII Card, where:
MODE
Selects between wired and WiFi operation, where:
ENABLED
Enables the WiFi interface.
DISABLED
Enables the wired interface.
BSS ADDRESS
Sets the IP Address for the bridge module, where:
192.168.010.001
Is the address in standard octet format.
SIGNAL READINGS
Displays the WiFi signal strength, noise, and quality
levels.
IP ADDRESS
Specifies the static IP Address; where:
192.168.010.026
Is the address in standard octet format.
SUBNET MASK
Specifies the static Subnet Mask Address, where:
255.255.255.000
Is the address in standard octet format.
GATEWAY
Specifies the network Gateway Address, where:
192.168.010.026
Is the address in standard octet format.
SNMPTRAP DESTINATION
Specifies the SNMP Trap Address, where:
000.000.000.000
Is the address in standard octet format where SNMP
traps will be sent when SNMP service is installed on
your receiver.
;
When zeroed, no traps are sent.
Summary of Contents for H-4212X
