USE AND FUNCTIONING
3
3.7.5 Ethernet
Settings
Datalogic Skorpio™ can be connected to an Ethernet network by inserting it into the
Datalogic Skorpio™ Ethernet Multi Cradle.
NOTE
Ethernet communication requires Datalogic Skorpio™ SW version
5.41 or later. Verify the software version by tapping on Software –
Version in the Datalogic default home page. Otherwise, search for
the file version.htm under the Windows folder.
When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installed
on the mobile computer will automatically run, and using the DHCP service, will
dynamically assign the IP Address.
1. From the Datalogic Skorpio™ open Internet Explorer>Internet Options and
check
use LAN no autodial
then OK.
2. From the Datalogic Skorpio™ > Explorer, enter the IP address in the address
bar (or name), of the PC on the network that you want to communicate with. You
may be required to enter your network username and password. The LAN
connection will take place and you can see the PC shared folders.
You can download files from the PC to Datalogic Skorpio™ but not vice versa. To do
this use an FTP connection (see par. 3.8.4).
If your network provides Internet Service and does not use a proxy server you can
directly access the Internet. Otherwise set the internet proxy parameters according to
your network settings.
31
Summary of Contents for Skorpio
Page 1: ...Datalogic Skorpio User s Manual...
Page 2: ......
