Datalogic Rhino II A6, User Manual, Page: 29 / 78

Rhino II Configuration
User’s Manual 23
Frontkey_XX=<Application path> to launch an application. (S1..S4 only)
The virtual keycodes are listed in Appendix 2 - Virtual Keycodes
Reference on page 41 .
Example:
Frontkey_S1=#EXT=VK_TAB,VK_RETURN
would cause the S1 key to transmit TAB followed by RETURN.
Frontkey_S1=/Android/Data/Datalogic/Sample
will launch the Sample program when the button 1 is pressed.
The PWR button should not be reprogrammed, but this option is
available if required. Set PWR to blank to let it execute
Startup/Shutdown. Set Plus and Minus buttons to blank to let them
respectively increase and decrease backlight brigthness.
These are the default values from the factory:
• Frontkey_PWR=
• Frontkey_S1=#EXT=VK_UP
• Frontkey_S2=#EXT=VK_DOWN
• Frontkey_S3=#EXT=VK_ESCAPE
• Frontkey_S4=#EXT=VK_RETURN
• Frontkey_KEY=#EXT=VK_HOMEPAGE
• Frontkey_FNPlus=
• Frontkey_FNMinus=
Other parameters that control the state of keys are listed below:
Key - Section name Parameter – Info
[Hardware]
FNKeyTimeout
Time in 10ms units for which FN key state stays
active after pressure.
800 = default.