Datalogic PowerScan D8300, Reference Manual

Page: 86 / 245

Enter Configuration Exit and Save Configuration
Ì$+;Î
DATA FORMAT
Ì$-?Î
77
CHARACTER REPLACEMENT

disable character replacement
ÌEO0mÎ
This parameter allows up to three characters to be replaced from the barcode read. These
substitutions are stored in memory. To define each
character replacement:

Read one of the following character replacement codes:
first character replacement
 ÌEO1pÎ
second character replacement
 ÌEO2sÎ
third character replacement
 ÌEO3vÎ

From the Code Identifier Table in Appendix
B
, read the Code Identifier for the desired
code family.
0 = character replacement will be effective for all code families.

From the Hex/Numeric Table read two characters corresponding to the Hex value
(
00 - FE ), which identifies the character to be replaced. For Wedge and USB-KBD
interfaces, it is also possible to read the Special Key(s) on page 74.

From the Hex/Numeric Table read two characters corresponding to the Hex value
(
00 - FE ), which identifies the new character to replace. For Wedge and USB-KBD
interfaces, it is also possible to read the Special Key(s) on page 74.
FF = the character to be replaced will be substituted with no character, that is, it will be
removed from the code.