Quick Reference Guide
3
Power Supply
Models require
1
either a Listed class II or class III with a Limited
Power Source (LPS). For the safety certification to be valid, class
III input power sources must be IEC/EN60950-1 (EN 60335-
series, EN 60065 or relevant) approved.
Input: 100 - 240 VAC
Output: 12 VDC
Max. Current: 1.5 A
Max. Power: 18 W
How to Scan
The scanner is mounted flush with the counter to allow items to
be slid or pushed over its top in the direction of the arrow as
shown in
Figure 3
. Face the bar code toward the scanner or direc-
tion of scan to optimize the scan rate.
Figure 3. Scanning Items
1. Power Off the Terminal (POT) units do not require a power supply.
1. Product
2. Bar Code
3. LED Indicator
4. Slide or push items in the direction of the arrow
2
3
4
1
