Datalogic Heron HD3430, Product Reference Manual

Page: 100 / 310

Enter/Exit Programming Mode Audio Jingles
92 Heron™ HD3430
Select Audio Jingle for Good Read Event
This parameter selects which preloaded Jingle to use in indicating a good read
event.
NOTE
"Audio Jingle Enable"
on page 90 must be selected for this configuration
item to take effect.
After uploading up to fifteen (15) Jingles to the scanner using the Datalogic
Aladdin
™
configuration utility, use this setting to designate which of the Jingles
(1-15) will be sounded when the scanner performs a good read.
Select Audio Jingle on Good Read
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by two digits
from the Alphanumeric characters in
Appendix D,
Keypad
representing the desired Jingle #. End by scan-
ning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
00 = Use built-in Good Read Jingle (Shutter.wav)
$CAUGR
~