Datalogic Heron HD3430, Product Reference Manual

Page: 276 / 310

Technical Specifications
266 Heron™ HD3430
LED and Beeper Indications
The imager’s beeper sounds and its illumination flashes or changes color to
indicate various functions or errors on the reader. A “Green Spot” also lights to
indicate a good read. The tables below list these indications.
Table 23. LED and Speaker Indications
Indication LED Beeper Indication
Power-up
Upper LED flashes/blinks on
power-up, however, this may be
too rapid to view. With a USB
interface, the LED blinks until
enumeration with the host is
completed.
Imager beeps four times at
highest frequency and vol-
ume upon power-up.
Power-up
Good Read
Upper green LED comes on for
programmed time (default).
LED behavior for this indication
is configurable using Aladdin
utility.
One beep at current fre-
quency, volume, mono/bi-
tonal setting upon a suc-
cessful label scan. It is also
possible to upload custom
jingles with Aladdin.
Good Read
ROM Failure 200ms on / 200ms off
Imager sounds one error
beep at highest volume for
200 mS.
ROM Failure
Limited Scanning
Label Read
N/A
Imager 'chirps' six times at
the highest frequency and
current volume.
Limited Scanning
Label Read
Imager Disabled
The LED blinks continuously
100mS on / 900 mS off
N/A Imager Disabled