Datalogic Gryphon I GD4400, Product Reference Manual

Page: 116 / 350

Enter/Exit Programming Mode
114 Gryphon™ I GD44XX/GBT4400/GM440X
Stand Illumination Control
Controls the illumination status while the reading mode is stand mode and
the reader is attempting to detect objects.
DEFAULT
$CSMIL00(CR)
Stand Illumination Control = OFF
$CSMIL01(CR)
Stand Illumination Control = ON
$CSMIL02(CR)
Stand Illumination Control = Dim
Motion Still Timeout
Motion Still Timeout specifies the waiting time after which no motions is
detected. When no motion is detected for period of time longer than the set
Motion Still Timeout period, the scanner assumes it is in a motionless con-
dition. The selectable setting are from 500 to 25,500 milliseconds in 100
millisecond increments. The default is 2 seconds. This option relates to such
features and the Aimer On timing and Stand Mode Object Sense scanning
with respect to motion. See page 305 in "References" for detailed informa-
tion on setting this feature.
$CMOTO/r
Select Motion Still Timeout Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
14 = Motion Still Timeout for 2 seconds