SC6000
28
2
Menu
Branch
Branch
Note
Setup
Time
Set system time:
Up & Down to change values, Enter to
change fields, at last field Enter exits saving
new values
Date
Set system date:
Up & Down to change values, Enter to
change fields, at last field Enter exits saving
new values
Ethernet
Primary Ethernet interface
IP addr
Set IP Address
GW addr
Set Gateway Address
Net mask
Set Netmask
MAC addr
(it is advised not to change this value)
DeviceNet
addr
DeviceNet node address
(only DeviceNet models)
Profibus addr
Profibus node address
(only Profibus models)
Add.
Ethernet
supplementary Ethernet interface
(only Dual Ethernet models)
IP addr
IP Address
GW addr
Gateway Address
Net mask
Netmask
MAC addr
(it is advised not to change this value)
CFlash
Format
Format the Compact Flash Disk
Format&Rep
Format and repair corrupted CF
Del Logs
Del log files (SC8000 compatibility)
Info
Shows CF capacity, free and used space
Lonworks
Autoset
Performs the Net-Autoset procedure: assigns
random addresses to all slave nodes
Stat.
Prints Lonworks network statistics (not data),
to the enabled serial port
Statistics
Reset Statistics
Resets Statistical Counters
The Address parameters may be set through Genius™, (see chapter 3 for details).
For software versions earlier than 4.20, Statistical Counters can be reset by pressing the
Setup Key.
